Handwielen, handslingers
Knoppen, vleugelmoeren
Klemhendels, verstelbare handgrepen
Beugelgrepen, handgrepen
Vaste, draaiende handgrepen
Control elements
Indicatoren, klokhandwielen
Blokkeerbouten, drukstukken
Machine elementen
Koppelingen, tandwielen
Stelvoeten, stelelementen
Scharnieren
Vergrendelingen, deursluitingen
Snelspanners, spansluitingen
Hydrauliek componenten
Tube clamp connectors
Castors and wheels
Magneten
Transportband componenten
Lineaire bewegingscomponenten
Trillingsdempers
Aluminium profielen
Vacuüm componenten
Omschrijving
Material
Glass-fibre reinforced polyamide based (PA) SUPER-technopolymer.
Colour
- CFM.: black, matte finish.
- CFM-CLEAN: white similar to RAL 9002, matte finish.
Rotating pin
AISI 303 stainless steel.
Standard executions
- CFM-p: nickel-plated steel threaded studs.
- CFM-SH: pass-through holes for countersunk head screws.
- CFM-CH: pass-through holes for cylindrical head screws with washer type UNI 6592.
- CFM-p-SH: nickel-plated steel threaded studs and pass-through holes for countersunk head screws.
- CFM-p-CH: nickel-plated steel threaded studs and pass-through holes for cylindrical head screws with UNI 6592 washer.
- CFM.60-SL-CH: pass-through slotted hole for shorted cylindrical head screws UNI 9327 which allow adjustment during clamping.
Rotation angle (approximate value)
Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
To choose the convenient type and the right number of hinges for your application, see the Guidelines-.
| Resistance tests | AXIAL STRESS | RADIAL STRESS | 90° ANGLED STRESS |
 |  |  | |
| Description | Max limit static load Sa [N] | Max limit static load Sr [N] | Max limit static load S90 [N] |
| CFM.30 SH-4 | 1400 | 1700 | 1000 |
| CFM.30 CH-4 | 1300 | 1700 | 850 |
| CFM.40 p-M5x12 | 2000 | 1900 | 1000 |
| CFM.40 SH-5 | 1900 | 1900 | 1280 |
| CFM.40 CH-5 | 1900 | 1600 | 1000 |
| CFM.40 p-M5x12-SH-5 | 1900 | 1900 | 1000 |
| CFM.40 p-M5x12-CH-5 | 1900 | 1600 | 1000 |
| CFM.50 p-M6x12 | 2340 | 2560 | 2100 |
| CFM.50 SH-6 | 2630 | 2400 | 1720 |
| CFM.50-63 SH-6 | 800 | 1600 | 1000 |
| CFM.50-76 SH-6 | 600 | 1500 | 1000 |
| CFM.50 CH-6 | 2860 | 2410 | 1360 |
| CFM.50 p-M6x12-SH-6 | 2340 | 2400 | 1720 |
| CFM.50 p-M6x12-CH-6 | 2340 | 2410 | 1360 |
| CFM.60 p-M8x14.5 | 3000 | 3940 | 2130 |
| CFM.60 SH-8 | 3320 | 2960 | 3070 |
| CFM.60 CH-8 | 3440 | 2810 | 2170 |
| CFM.60 p-M8x14.5-SH-8 | 3000 | 2960 | 2130 |
| CFM.60 p-M8x14.5-CH-8 | 3000 | 2810 | 2130 |
| CFM.60-45-SH-6 | 2920 | 3010 | 1310 |
| CFM.60-SL-CH-6 | 960 | 1200 | 1360 |
The max static load is the value above which the material may break thus prejudicing the hinge functionality use. Obviously, a suitable factor, according to the importance and the safety level of the specific application must be applied to this value.
Valid values also for CFM-CLEAN.
Uitvoering
| Filters resetten | Filter: | ||||
Code |
Product omschrijving |
Aantal |
Prijs |
Bestel |
CAD |
|---|---|---|---|---|---|
| 201400620 | CFM.40-p-M5x12 |
|
|||
| 201400670 | CFM.50-p-M6x12 |
|
|||
| 201400720 | CFM.60-p-M8x14.5 |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
b2 |
h2 |
d4 |
L |
d2 |
Gewicht (g) |
f±0.25 |
d |
b1 |
h1 |
l |
h3 |
Koppel SH CH |
f1 ±0.25 |
d3 |
Koppel p |
d5 |
B |
H |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 14 | 5 | N.v.t. | 40 | M5 | 26 | 25 | 4 | 14 | 5.5 | 12 | N.v.t. | N.v.t. | 25 | N.v.t. | 5 | N.v.t. | 40 | 9 |
| 18 | 6 | N.v.t. | 50 | M6 | 50 | 30 | 6 | 18 | 6.5 | 12 | N.v.t. | N.v.t. | 30 | N.v.t. | 5 | N.v.t. | 50 | 11.5 |
| 21 | 8 | N.v.t. | 60 | M8 | 101 | 36 | 8 | 21 | 8.5 | 14.5 | N.v.t. | N.v.t. | 36 | N.v.t. | 5 | N.v.t. | 60 | 15 |