GN 820.4

Horizontale snelspanner RVS / Staal

Types

• Type NL: U-bar version, with two flanged washers

• Type NLC: U-bar version, with two flanged washers and GN 708.1 spindle assembly

• Type PL: Solid bar version, with clasp

• Type VL: Clamping arm extended, with slotted hole and with two flanged washers (Version in Steel)

• Type VLC: Clamping arm extended, with slotted hole, two flanged washers and clamping screw GN 708.1 (Version in Steel)

Version in Steel

• Case-hardened Steel C10, zinc plated, blue passivated

• Bearing pins tempered

• Bearing rivets (for size 355 and up), case-hardened

All moving parts

lubricated with special grease

Hand grip

High quality, oil resistant red plastic

Clamping screw GN 708.1, type A

Steel, zinc plated

Rubber tip 85 Shore A

Version in Stainless Steel NI

All moving parts

lubricated with special grease

Hand grip

High quality, oil resistant red plastic

Spindle assembly  GN 708.1, type A

Stainless Steel AISI 304

Rubber tip 85 Shore A

• Stainless Steel AISI 304

• Rubber tip 85 Shore A

GN 820.4 toggle clamps have a safety function whereby, during closing, a spring loaded safety hook latch ensures a secure locking connection. It prevents the inadvertent unlocking of the clamp due to vibrations or an accidental attempt of loosening / opening of the clamp. To open and release the clamp, pull up on the finger grip to disengage the safety hook latch mechanism (one hand operation).

They work according to the toggle principle: lever and clamping bar move in the opposite direction. They require less space for the clamping action.

Toggle clamps in the U-bar version with two flanged washers (type NL) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type NLC.

Toggle clamps in the type PL version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 holders for clamping screws to hold the work piece in place.

Toggle clamps in the U-bar version with two flanged washers (type VL) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for type VLC.

• General information for toggle clamps 

• Stainless Steel characteristics 

• Spindle assemblies

• Clamping screws

• Holders for clamping screws GN 801 (for type NL and VL)

• Holders for clamping screws GN 809 (for type PL)

• Clamping arm extenders GN 809.1 (for type PL)

• Clamping arm extenders GN 801.1 (for type NL and VL)

• Clamping arm extenders GN 801.2 (for type NL and VL)